Weight |
9.72 kg |
Motor size |
110 |
Size |
500 mm |
Rotor surface |
Painted black |
Terminal box material |
PP plastic |
Blade material |
Press-fitted, painted sheet steel blank, sprayed with PP plastic |
Number of blades |
5 |
Airflow direction |
A |
Direction of rotation |
Clockwise, viewed toward rotor |
Degree of protection |
IP54 |
Insulation class |
"F" |
Ambient temperature note |
Occasional start-up between -40°C and -25°C is permissible.|For continuous operation at temperatures below -25°C (e.g. refrigeration applications) we recommend our fan design with special low-temperature bearings. |
Moisture (F) / Environmental (H) protection class |
H2+A |
Max. permitted ambient temp. for motor (transport/storage) |
+ 80 °C |
Min. permitted ambient temp. for motor (transport/storage) |
- 40 °C |
Installation position |
Shaft horizontal or rotor on top; rotor on bottom on request |
Condensation drainage holes |
On stator side |
Mode |
S1 |
Motor bearing |
Ball bearing |
Touch current according to IEC 60990 (measuring circuit Fig. 4, TN system) |
<= 3,5 mA |
Electrical hookup |
Terminal box / Via terminal box, capacitor integrated and connected |
Motor protection |
Thermal overload protector (TOP) with basic insulation |
with cable |
Axial |
Protection class |
I (with customer connection of protective earth) |
Motor capacitor according to EN 60252-1 in safety protection class |
S0 |
Conformity with standards |
EN 61800-5-1; EN 60034-1 (2010) / CE |
Approval |
CSA C22.2 No. 100 / EAC / VDE / UL 1004-1 |