W8D800NG0111

W8D800-NG01-11

AC axial fan - AxiBlade

Motor: M8D138-HF

Technical description
Weight 42.0 kg
Motor size 138
Size 800 mm
Rotor surface Cast in aluminum
Impeller material PP plastic
Fan housing material PP plastic
Material guide vanes PP plastic
Guard grille material Steel, coated with black plastic (RAL 9005)
Number of blades 5
Blade pitch
Airflow direction V
Direction of rotation Clockwise, viewed toward rotor
Degree of protection IP54
Insulation class "F"
Ambient temperature note If there is a risk of ice formation, the fan is only to be operated with a heating tape in the fan housing. Further information can be obtained from ebm-papst. As fan only suitable for use with industrial evaporators
Moisture (F) / Environmental (H) protection class H2
Max. permitted ambient temp. for motor (transport/storage) +70 °C
Min. permitted ambient temp. for motor (transport/storage) -40 °C
Installation position See fitting instructions
Condensation drainage holes On rotor and stator sides
Mode S1
Motor bearing Ball bearing with low-temperature lubricant
Touch current according to IEC 60990 (measuring circuit Fig. 4, TN system) <= 3,5 mA
Electrical hookup Terminal box with cable
Motor protection Thermal overload protector (TOP) with basic insulation
with cable Axial
Protection class I (with customer connection of protective earth)
Conformity with standards EN 60034-1 (2010) / CE
Approval EAC / CCC / VDE