Technical description
Weight 18.84 kg
Motor size 110
Size 630 mm
Rotor surface Painted black
Terminal box material PP plastic
Blade material Press-fitted sheet steel blank, sprayed with PP plastic
Fan housing material PP plastic
Material guide vanes PP plastic
Guard grille material Steel, coated with black plastic (RAL 9005)
Number of blades 5
Airflow direction V
Direction of rotation Counterclockwise, viewed toward rotor
Degree of protection IP54
Insulation class "F"
Ambient temperature note If there is a risk of ice formation, the fan is only to be operated with a heating tape in the fan housing. For more detailed information, consult ebm-papst. As a fan for use with industrial evaporators, suitable for ambient temperatures between -40°C and +20°C, occasional start-up at up to +40°C permissible.
Moisture (F) / Environmental (H) protection class H2
Max. permitted ambient temp. for motor (transport/storage) +70 °C
Min. permitted ambient temp. for motor (transport/storage) -40 °C
Installation position See fitting instructions
Condensation drainage holes On rotor side
Mode S1
Motor bearing Ball bearing with low-temperature lubricant
Touch current according to IEC 60990 (measuring circuit Fig. 4, TN system) <= 3,5 mA
Motor protection Thermal overload protector (TOP) with basic insulation
Protection class I (with customer connection of protective earth)
Conformity with standards EN 61800-5-1; EN 60034-1 / CE
Approval EAC / VDE