| Weight |
14 kg |
| Motor size |
110 |
| Size |
500 mm |
| Rotor surface |
Painted black |
| Blade material |
Press-fitted sheet steel blank, sprayed with PP plastic |
| Fan housing material |
PP plastic |
| Material guide vanes |
PP plastic |
| Guard grille material |
Steel, coated with black plastic (RAL 9005) |
| Number of blades |
5 |
| Airflow direction |
V |
| Direction of rotation |
Counterclockwise, viewed toward rotor |
| Degree of protection |
IP54 |
| Insulation class |
"F" |
| Ambient temperature note |
If there is a risk of ice formation, the fan is only to be operated with a heating tape in the fan housing. Further information can be obtained from ebm-papst. As fan only suitable for use with industrial evaporators |
| Moisture (F) / Environmental (H) protection class |
H2 |
| Max. permitted ambient temp. for motor (transport/storage) |
+70 °C |
| Min. permitted ambient temp. for motor (transport/storage) |
-40 °C |
| Installation position |
See fitting instructions |
| Condensation drainage holes |
On rotor side |
| Mode |
S1 |
| Motor bearing |
Ball bearing with low-temperature lubricant |
| Touch current according to IEC 60990 (measuring circuit Fig. 4, TN system) |
<= 3,5 mA |
| Motor protection |
Thermal overload protector (TOP) with basic insulation |
| Protection class |
I (with customer connection of protective earth) |
| Conformity with standards |
EN 60034-1 (2010) / CE |
| Approval |
VDE / EAC |
