| Weight |
17.66 kg |
| Motor size |
110 |
| Size |
500 mm |
| Rotor surface |
Painted black |
| Terminal box material |
PC/ABS plastic |
| Blade material |
Press-fitted sheet steel blank, sprayed with PP plastic |
| Fan housing material |
Sheet steel, galvanized and coated with cement-gray plastic (RAL 7033) |
| Guard grille material |
Steel, coated with cement-gray plastic (RAL 7033) |
| Number of blades |
5 |
| Airflow direction |
A |
| Direction of rotation |
Clockwise, viewed toward rotor |
| Degree of protection |
IP54 |
| Insulation class |
"F" |
| Ambient temperature note |
Occasional start-up at temperatures between -40°C and -25°C is permitted. For continuous operation at ambient temperatures below -25°C (such as refrigeration applications), use must be made of a fan design with special low-temperature bearings. |
| Moisture (F) / Environmental (H) protection class |
H2+T |
| Max. permitted ambient temp. for motor (transport/storage) |
+80 °C |
| Min. permitted ambient temp. for motor (transport/storage) |
-40 °C |
| Installation position |
Shaft horizontal or rotor on top; rotor on bottom on request |
| Condensation drainage holes |
On stator side |
| Mode |
S1 |
| Motor bearing |
Ball bearing |
| Touch current according to IEC 60990 (measuring circuit Fig. 4, TN system) |
<= 3,5 mA |
| Electrical hookup |
Terminal box |
| Motor protection |
Thermal overload protector (TOP) with basic insulation |
| with cable |
Axial |
| Protection class |
I (with customer connection of protective earth) |
| Motor capacitor according to EN 60252-1 in safety protection class |
S0 |
| Conformity with standards |
EN 60034-1 (2010) |
| Approval |
CSA C22.2 No. 100 / EAC / UL 1004-1 / VDE |
