Technical description
Weight 29.8 kg
Motor size 110
Size 630 mm
Rotor surface Painted black
Terminal box material Die-cast aluminum, painted black
Blade material Press-fitted, painted sheet steel blank, sprayed with PP plastic
Fan housing material Sheet steel, galvanized and coated with white aluminum plastic (RAL 9006)
Guard grille material Steel, coated with white-aluminum plastic (RAL 9006)
Number of blades 5
Airflow direction A
Direction of rotation Clockwise, viewed toward rotor
Degree of protection IP54
Insulation class "F"
Ambient temperature note Occasional start-up at temperatures between -40°C and -25°C is permitted. For continuous operation at ambient temperatures below -25°C (such as refrigeration applications), use must be made of a fan design with special low-temperature bearings.
Moisture (F) / Environmental (H) protection class H2+T
Max. permitted ambient temp. for motor (transport/storage) + 80 °C
Min. permitted ambient temp. for motor (transport/storage) - 40 °C
Installation position Shaft horizontal or rotor on top; rotor on bottom on request
Condensation drainage holes On stator side
Mode S1
Motor bearing Ball bearing
Touch current according to IEC 60990 (measuring circuit Fig. 4, TN system) <= 3,5 mA
Electrical hookup Terminal box
Motor protection Thermal overload protector (TOP) with basic insulation
Protection class I (with customer connection of protective earth)
Conformity with standards EN 60034-1 (2010) / CE
Approval CCC / CSA C22.2 No. 100 / UL 1004-1 / VDE